Photovoltaic&Intelligent Sunroom

Adopting 6+6+6 laminated tempered ultra white glass or 8+8+8 laminated tempered ultra white glass (Guangjin Green Energy Perovskite Power Generation Technology)

6-8 mm tempered ultra white glass (South Glass, Xinyi) PVB using 0.76-1.52 photovoltaic perovskite film 6mm tempered ultra white glass (South Glass, Xinyi) including conductive components

Performance: Meets national building standards, with a 25 year warranty. Power generation efficiency: around 8-15%. 80-160Wh/square meter.

Adopting German technology, the sound insulation reaches over 60 decibels, with good water and air tightness. The three-layer laminated glass is known as small bulletproof glass. Anti typhoon, rainstorm and all kinds of bad weather. It is also the main material for BIPV buildings.

Please contact the sales personnel for detailed parameters.

The design and construction of the project must comply with the relevant requirements of the "Technical Standards for Application of Building Photovoltaic Systems" (GB/T 51368-2019) and the "General Specification for Building Energy Efficiency and Renewable Energy Utilization" (GB 55015-2021) issued by the Ministry of Housing and Urban Rural Development. The wind pressure resistance level should be calculated and determined according to the current national standard "Code for Load of Building Structures" (GB 50009-2012).

The highest point of photovoltaic project installation shall not exceed 2.8 meters from the roof. For residential photovoltaic projects with stairwells, the highest point of installation shall not be higher than 1 meter above the stairwell roof (the highest point shall not be higher than 4 meters above the roof of the roof); And no building space shall be enclosed on all four sides, and no additional building area shall be increased by using photovoltaic projects.

Please contact the sales personnel for detailed parameters.